Copyright (c) 2026 Raj Kamal, Namoju Navya, Nalla Manoj Kumar, Nakkala Akshitha, M. Sanjay Reddy

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
A Validated RP-HPLC Method Development for the Simulatneous Estiamtion of Rosuvastatin and Telmisartan in Bulk Form and Marketed Pharmaceutical Formulations
Corresponding Author(s) : Raj Kamal
International Journal of Allied Medical Sciences and Clinical Research,
Vol. 14 No. 3 (2026): 2026 Volume -14 - Issue 3
Abstract
A simple, accurate and precise HPLC method for simultaneous determination of Rosuvastatin and Telmisartan in pure and tablet dosage form has been developed. To develop and validate analytical method for simultaneous estimation of Rosuvastatin and Telmisartan in pharmaceutical formulation by RP-HPLC. HPLC of Waters (Model: Alliance 2695) with Phenomenex Luna C18 (4.6 mm I.D. × 250 mm, 5 µm) column was used for chromatographic separation. It contains waters injector and PDA Detector (Deuterium). Mobile phase consists of Methanol: Water (65:35% v/v) and flow rate adjusted was 1ml/min. Wavelength selected for detection was 220nm and injection volume was 10 µl. By using the developed method, retention time of Rosuvastatin and Telmisartan was found to be 3.2min and 5.4min respectively. The method has been validated for linearity, accuracy and precision. Linearity of Rosuvastatin and Telmisartan were in the range of 75–375μg/ml and 15–75μg/ml respectively. The percentage recoveries obtained for Rosuvastatin and Telmisartan were found to be in range of 99.3 – 99.6%. LOD and LOQ were found to be 12.5µg/ml and 38.1µg/ml for Rosuvastatin 3.7and 11.4µg/ml for Telmisartan. The developed HPLC method offers several advantages such as rapidity, usage of simple mobile phase and easy sample preparation steps. Further, improved sensitivity makes it specific and reliable for its intended use. Hence, this method can be applied for the analysis of pure drug and pharmaceutical dosage forms. From the present study it can be concluded that the proposed method is simple, sensitive, precise, specific, accurate and reproducible. Results of validation parameters demonstrated that the analytical procedure is suitable for its intended purpose and meets the criteria defined in ICH Q2R1.